Get the Best Work Boots for Concrete Floors – No More Pain on the Job 2017
Working with concrete all day can take a serious toll on your feet. Any discomfort you have may be from the wrong footwear. The shoes you wear have more impact than you may realize.
Since your feet literally hold up all of your weight and then some, they are pretty vulnerable. You can even develop back problems from standing for extended periods of time. Having the best work boots for concrete floors will make your day much more bearable.
Concrete is designed to have as little give as possible. Because of this, when you walk your feet are unable to conform to the ground. When this happens, they have to absorb all of the pressure from below and above.
To ensure that your feet are as comfortable and protected as possible, the first thing to do is to evaluate your shoes. They should be sturdy and feel like they are not even there. The less you notice them, the less trouble you will have.
Quick Comparison of the 8 Best Work Boots for Concrete
1. Timberland PRO 52562 Endurance - Best of the Best
2. KEEN Utility Pittsburgh - Editor's Choice
3. Wolverine Moc-Toe - Best Bang for the Buck
4. Thorogood American Heritage - Editor's Choice
7. Timberland PRO Ascender - Hot New Product
There are a few primary features you want to look for while looking for your next pair of work shoes. Comfort, ankle support, shock absorption and durability are all important factors to look for in your search. These features are what you really need to be ready for working on concrete.
The comfort of your shoes is probably the most important to you. If you are trying to do your job while you are uncomfortable and/or in pain seriously it sucks. The sole of the shoe is what your feet are resting on throughout the day. Therefore, it has to be comfortable and conform to your feet in a certain way.
This ultimately depends on what your feet need. If you are flat footed you will need some more arch support, and vice versa. You can also get some work insoles to add inside the shoe. These insoles can have a significant impact on the comfort of your shoes. To be most comfortable, your shoes should be barely noticeable, as an afterthought.
2. Ankle Support
Your ankles go through a lot during your day as well. By having support around your ankles, you ensure that there will be no painful friction going on. You will even be able to walk a little lighter over the ground. Ankle support is not for everyone. If you need it, being there is great. It may just be an annoyance to others. Choose whatever is most comfortable. That is why we are here, right?
3. Shock Absorption
The ability to absorb shock is critical. It is what keeps your feet from getting the full brunt of the pressure. It protects your feet from unforgiving surfaces. Protecting your feet from injury depends on this feature to handle even the heaviest step.
The better shock absorption that your shoes have, the less fatigued and will do less damage on your knees and back. The impact that is usually on your feet is absorbed to give you the most comfortable experience.
Shoes tend to wear pretty quickly if you wear them a lot. Sometimes, you have to sacrifice some durability for comfort. The soft material can be less sturdy from time to time. You have to decide for yourself what your preference is.
There are many comfortable and durable pairs. They all have different qualities that are desirable. Stitching, material, and construction are what contribute to the durability of your work boots.
Reviews of 8 Best Work Boots for Concrete Floors
With the right work boots, you will be super comfortable and protected throughout the day. Your work boots should fit your feet so that you do not feel them. The less attention they bring, the better.
- The Following Eight Pairs Of Boots Are Some of The Best Work Boots For Concrete
1. Timberland PRO Men's 52562 Endurance 6" PR Work Boot
Comfort - As far as the comfort department is concerned, I think the Timberland PRO 52562 Endurance 6-inch PR Work Boot for men did a pretty nice job. It is even safe to say that it redefines the word comfort considering the many comfortable features integrated into this footwear.
The fact that it is comfortable makes it one of the best work boots for concrete, especially if you have to be on your feet for several hours a day. Comfort can also be expected due to the built-in anti-fatigue technology, which is not only shock-absorbent but is also capable of returning energy at key zones of your feet.
The result is long-lasting, 24-hour comfort, particularly in areas where it is needed. Another reason why it is a comfortable shoe is the contoured footbed made of single-density, open-cell polyurethane material. Such features an antimicrobial cover designed to offer breathable comfort and effective odor control.
Ankle Support - This shoe also provides impressive ankle support. It is primarily due to the contoured insole built into it, which is guaranteed to offer maximum support, especially at impact zones and key pressure areas, including the ball of your feet, heel, and ankles.
It also features a steel toe cap, which makes it protective while also providing a roomy fit. The cement construction makes it more stable and flexible, thereby providing more ankle support and lessening the break-in period.
Shock Absorption - The shoe is also made to be shock-absorbent. It even features an innovative design, which lessens impact with the aid of the shock-absorbent cones. Such cones can be expected to compress and rebound, providing maximum support while also reducing foot fatigue.
Durability - This shoe from Timberland is also one of the most durable products offered by the brand. It uses genuine leather for its construction, making it long-lasting. Furthermore, there is an abrasion-resistant rubber double toe, which is effective in increasing its double toe and boosting protection.
There’s a downside, though, and that is it produces a noise when you take your steps. However, the noise is not that bothersome and is actually manageable.
2. KEEN Utility Men's Pittsburgh Steel Toe Work Boot
Comfort - If you are looking for a really comfortable work boot that you can use in concrete, then the KEEN Utility Pittsburgh Steel Toe Work Boot for men is what I can recommend to you. I think it is impressive in the comfort category as it is well-padded. It features a waterproof and breathable lining, thereby keeping moisture out.
It also boasts of an EVA footbed and midsole designed to offer support and comfort. You can wear it comfortably the entire day on concrete. You can also walk and take up and down steps when wearing this shoe without worrying about experiencing too much fatigue.
One more thing, it works well for those who have flat feet and plantar fasciitis. It is mainly because of its ability to offer excellent support, especially on the heel and arch.
Ankle Support - One of the major reasons to love this boot from KEEN is its superior ankle support. It supports not only your heel and arch but also your ankle. It comes with a full-length, interlocking TPU spin plate, which makes it highly flexible and stable even if you use it on rough surfaces.
The fact that it has an anti-slip rubber sole also makes it even more supportive. Such non-slip sole is effective in securing your footing, especially when you constantly step on oily surfaces. This steel toe boot also features a reflective webbing, electrical hazard protection, and rubber toe guard, which improves its ability to offer support and protection.
Shock Absorption - This KEEN shoe is shock-absorbent. It is made possible by its thick outer sole, which is not only known for its ability to resist slips and oils but also for being an electrical shock absorber.
Durability - This steel toe work boot from KEEN is highly durable – thanks to its built-in features and unique and sturdy construction that lets it withstand all working environments. The longevity of this shoe depends on what you constantly expose it, though.
If exposed to concrete and dirty surfaces, expect to hold up well. In addition, it is waterproof. It is designed for hardworking people, especially those who have hard and demanding jobs, so expect this boot to be really tough and rugged.
However, take note of its downside, which is its inability to handle extremely hot summer days since it means that its breathable membrane has to work doubly hard.
3. Wolverine Men's Moc-Toe 6" Work Boot
Comfort - When it comes to comfort, I can safely say that the Wolverine Moc-Toe 6-inch Work Boot for men can compete with the other brands. It is comfortable due to its lightweight cement construction. Aside from being lightweight, it also has breathable fabric linings.
The fact that it has a removable fully cushioned footbed means that your feet will stay comfortable within. Expect to be able to fight fatigue when wearing this shoe, too – that’s thanks to the built-in nylon shank, which is also lightweight.
Ankle Support - The shoe has a good ankle support. It is supportive enough to handle various surfaces, including those made of concrete – that’s made possible by its well-treaded sole, which can also resist water, abrasion, and oil. The nylon shank mentioned earlier also provides additional support.
Shock Absorption - Just like most of the footwear mentioned in this review, rest assured that this work boot from Wolverine is shock-absorbent too. It is also made possible by its shock-absorbent nylon shank. In addition, it helps ensure that your feet stay stress-free.
Durability - You can also rely on the durability of this work boot. It is because its upper construction is based on genuine full-grain leather material, which is known for its sturdiness. In addition, there is a classic Goodyear welt construction used in this boot, making it not only sturdy but also highly flexible.
However, note that it is not as tough as those work boots that use real steel toe caps. Still, I can offer an assurance that it is highly durable for its price.
4. Thorogood Men's American Heritage 8" Plain Toe Boot
Comfort - These work boots are extremely comfortable. They run a little large, so for best results or a half or full size down. With a Vibram rubber sole, comfort is maximized. They are so comfortable that they can be worn right outside the box.
Ankle Support - These work boots do not have very much ankle support. This is fine if you have strong ankles. There is a little less ankle than average, so it is not completely without. Your height and individual needs will most likely be met with this pair of work boots for cement.
Shock Absorption - This comfortable work boot has an insole with non-removable dual density ultimate shock absorption. This helps to stop a lot of that painful pressure you get from walking on concrete all day.
Durability - Made with supple leather and a Vibram sole, these shoes are known to last a long time. Even so, depending on usage, they may wear easier than others. The rubber sole is sturdy. Work boots for concrete do not need to be broken in. They should fit and feel right the first time you put them on. This shoe will conform to your feet nicely.
They are not waterproof, but you can always waterproof them yourself. The stitching can also come apart, depending on the pair you receive.
5. EVER BOOTS "Tank" Men's Soft Toe Oil Full Grain Leather Insulated Work Boots Construction Rubber Sole
Comfort - With maximum comfort right out of the box, these work boots are ideal for working on concrete. They also do a great job of having sizes that will accommodate many people. If you have narrow feet, there is an option. You will never have to be in pain again.
Ankle Support - EVER BOOTS is very well-known for their high-quality boots. The ankle support on these work boots is incredible. They come up high enough to protect your ankles. Alternatively, they are not so short that you will have problems with them irritating your ankles.
Shock Absorption - With a shock-diffusion plate made out of nylon contoured perfectly for support, there is reliable shock absorption. This plate is located on the bottom of the shoe for the most shock absorption possible.
Durability - The least strong feature of these boots is the sole. It tends to come apart after a few months of wear. Otherwise, they are sturdy and waterproof.
However, they do not handle winter weather well. If you need them for winter, a thick pair of socks and a slightly larger size will probably suffice.
6. King Rocks Men's Moc Toe Construction Boots Work Shoes
Comfort - Lightweight and adaptable work boots are perfect for working on concrete. These boots are as such and are super comfortable. There is little room for improvement when it comes to the insoles. Buying your own pair will be okay, and will fit perfectly in your shoe. Insoles can really make a difference with any shoes that you wear.
Ankle Support - The ankle support on these boots is average. They will not bother you and are just enough to help out. There is mesh lining near the ankle area that is cooling and comfy. Ankle support is good, and will help you feel more comfortable in your work boots.
Shock Absorption - The sole of this shoe has shock absorbing compression pads on the outside. On the bottom, there is a
Durability - Durability is the primary feature of these boots. They are sturdy and will last a very long time. The only thing you may have a problem with are the shoelaces, which tend to fray after some time.
They are not waterproof but again, you can do that yourself if you need to. It is worth it for these boots since they are so amazingly durable. Slip resistance is another plus that goes along with these boots. Made out of pure leather, these boots will not let you down.
7. Timberland PRO Men's Ascender 6" Alloy Safety Toe Industrial and Construction Shoe
Comfort - These shoes can be called an upgrade to the other Timberland PRO shoes. Even more comfortable, they are ready for wear right outside the box. The footbed is fully cushioned, and you will love how they feel on your feet. These are super comfortable and may be worth the sacrifice when it comes to durability.
Ankle Support - There is plenty of comfortable material around the ankle area. The soles will also help to support your ankles and ensure that they will not end up hurting your legs or back.
Shock Absorption - This Timberland brand is super shock resistant with shock absorbing compression pads on the outside. There is also a
Durability - These boots do have the same quality of durability. The sole tends to disintegrate, and they just do not last very long. But, the premium full gain leather will make these boots durable and comfortable.
8. Irish Setter Men's 83605 6" Work Boot
Comfort - Order these boots a whole or half size down from your normal size. This is of particular importance for this pair. The heel is slightly large, and your feet may slip around if they do not fit correctly.
However, they are very comfortable and will conform to your feet. Just the right amount of sole and leather, these shoes will be comfortable for a long time. With insoles, they are just insanely comfortable.
Ankle Support - The ankle support on these work boots is short but efficient. There is plenty of space for them to be comfortable. With the proper size, your ankles will thank you for getting such great work boots.
Shock Absorption - Unlike the other pairs of shoes, there is no direct feature that addresses shock absorption. However, the soles are thick and sturdy, making comfort a priority.
Durability - Much like the other, these shoes may tend to fall apart in a short period of time. They will not break in, so getting a properly fitting pair is paramount. They run large for some people, but will also run small. The fit is a little finicky.
The sole might separate from the heel with a lot of wear. The stitching could also be done better as well since it might come apart within a few months.
Finding the best work boots for concrete floors is not impossible. You may have to go through a few before you find the right ones for your feet. Remember to keep in mind your personal needs as well as the features of each pair of boots.
The best pair out of these five is the King Rocks Men's Moc Toe Construction Boots Work Shoes. This is because they are not only comfortable but the sturdiest of all of the aforementioned pairs of work boots. The only adjustment they might need is an insole, and those are easy to find and put in.
The durability is a great thing since you will not have to buy pair after pair. Waterproof them and get your own shoelaces, if desired, and you will be set with a fantastic pair of work boots.
Cement is hard to stand on for extended periods of time. With any of these pairs, you will have a much more comfortable experience at work. If American-made products are something you insist on, your best bet is Thorogood Men's American Heritage 8" Plain Toe Boot. Nevertheless, your feet will be so much more comfortable, no matter which pair you choose.
If you like products made in USA, you may read "Georgia Boots Reviews"